Thingsee AIR firmware 2020.08.18.4_ts_airwp50

Firmware info

Version2020.08.18.4_ts_airwp50
Statusproduction

New features

  • 1st commercial firmware release

Error corrections

  • None

Known issues

  • None

Battery life

Test scenarioResult
All sensors using on average 5 minute measurement and reporting intervalexpected battery-life 2 years

Compatibility

The firmware is compatible with the products using following IMCs (TUID prefix)

  • TSAR01
  • XXAR01

Wirepas info

Wirepas stack version5.0
Wirepas application flash size48
Wirepas application area ID0

Thingsee messages

This firmware uses following Thingsee messages

Application messages

The firmware application sends these messages to the cloud service.

Message TypeMessage headerDescriptionPropertiesMessaging
Timebased (tsmEv 10)tsmId=12100Report all measurement values every 1 hourtemp humd airp lght Timed reporting interval 3600s (60min)
Timebased (tsmEv 10)tsmId=24100Report all measurement values every 1 hourcarbonDioxide status Timed reporting interval 3600s (60min)
Timebased (tsmEv 10)tsmId=24101Report all measurement values every 1 hourtvoc status Timed reporting interval 3600s (60min)
Eventbased (tsmEv 9)tsmId=12100Report only those properties that caused the eventtemp 
when absolute change 0.5
humd 
when absolute change 2
airp 
when absolute change 20
lght lghtint 
when absolute change 10000 
with attached properties lght
Measurement interval 300s (5min)Reporting only if the change is detected
Eventbased (tsmEv 9)tsmId=24100Report CO2 level immediately when value has changed more than set threshold from previous reported measurementcarbonDioxide 
when absolute change 10 
with attached properties status
status 
Measurement interval 300s (5min)Reporting only if the change is detected
Eventbased (tsmEv 9)tsmId=24101Report TVOC level immediately when value has changed more than set threshold from previous reported measurementtvoc 
when absolute change 30
Measurement interval 300s (5min)Reporting only if the change is detected

Application commands

These commands and configurations can be send from the cloud to the firmware.

Message headerDescriptionPropertiesMessaging
tsmId=24200 (tsmEv 30)Remotely configure Carbon Dioxide (CO2) sensor behaviour and how it reports sensor values.samples 
using default value 8
The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31

System messages

The firmware system sends these messages to the cloud service.

Message TypeMessage headerDescriptionPropertiesMessaging
Startup (tsmEv 11)tsmId=1100Report system infoswVersion modelCode psn 
Firmware response (tsmEv 33)tsmId=1102Indicates that the firmware can’t support requested tsmidrequestTsmId 
Timebased (tsmEv 10)tsmId=1110Report battery-levelbatl Timed reporting interval 21600s (360min)
Timebased (tsmEv 10)tsmId=1111Report acceleration dataaccx accy accz Timed reporting interval 21600s (360min)
Timebased (tsmEv 10)tsmId=1202Report network diagnosticstuid rssi rssiDbm neighNodeInfo neighRadioPower neighRadioPowerDbm Timed reporting interval 43200s (720min)
Startup (tsmEv 11)tsmId=1312Report firmware binary infobinaryType binaryVersion 
Error (tsmEv 29)tsmId=1403Report error eventerrorType errorCause 

System commands

These commands and configurations can be send from the cloud to the firmware.

Message headerDescriptionPropertiesMessaging
tsmId=1101 (tsmEv 32)Cloud may requests tsmId on requestrequestTsmId 
tsmId=1500 (tsmEv 30)Change the interval for measurement and reportingmeasurementInterval reportInterval The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31
tsmId=1501 (tsmEv 30)Change Wirepas node role configurationtransactionId nodeRole autoRole lowLatency The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31