Thingsee LEAKAGE RUGGED

Thingsee LEAKAGE RUGGED is a wireless IoT sensor for harsh environments that can detect even the smallest of leakages. As IP67 approved product, it can be used to identify water leakages and measure other environmental factors in extreme conditions such as factories, industries and even outdoors.

Thingsee LEAKAGE RUGGED is part of Haltian Thingsee IoT solution and product family.

Product information

Product name Thingsee LEAKAGE RUGGED
Product description Leakage sensor
Vendor name Haltian Oy
Product type Wirepas sensor
Internal Model Code (IMC prefix for TUID)
  • TSLK01
  • XXLK01

Sensor measurement specifications

Leakage
  • Measures leakage and moisture on flat surfaces and pipes.
  • Measurement range 10000 … 5000000
  • 5000000 = Dry floor
  • 1000000 – 2500000 = Tap water
  • 250000 – 330000 = Salt water
Temperature
  • Measurement range -40 … 85 °C
  • Please note recommended operation temperature range -20°C to +50°C
  • Accuracy ±0.3°C
Accelerometer
  • Accelerometer reports orientation or vibrations count in machine usage monitoring mode
  • Accuracy is ±0.2°C
Magnetic field
  • Magneto-resistive sensor detects magnetic field from magnet or high DC current
  • 0 = open
  • 1 = closed
Ambient light
  • Measurement is not calibrated
  • Use only for indicative purposes

Hardware info

Northbound interfaces
  • nRF52832 (Wirepas)
Battery type 2 x AAA (fixed)

Dimensions

Width 34.0mm
Height 17.5mm
Length 58.0mm
Weight 35 g

Operating conditions

Environment
  • Operating temperature -20°C … +50°C
  • Operating humidity 0% … 100% RH non-condensing
  • Storage temperature 5°C … +25°C
  • Storage humidity 45% … 85% RH non-condensing
  • IP rating IP67

Detection capability

  • Electrical resistance values between 10 000 – 5 000 000 units
    Example values:
    • Dry floor: 5 000 000 units
    • Tap water: 1 000 000 – 2 500 000 units
    • Salt water: 250 000 – 330 000 units
  • Temperature -40 ºC to +85 ºC. Please note recommended operation temperature range -20 ºC to +50 ºC .
    Accuracy ±0,3 ºC.
  • Accelerometer reports orientation or vibrations count in machine usage monitoring mode from 128 mG – 16 G.
  • Magneto-resistive sensor. Detects magnetic field from magnet or high DC current.

Default measurement and reporting

  • Event based reporting
    • Measure the following values every 30 seconds:
    • Resistance
    • Temperature
    • 3-axis acceleration
    • Ambient light
  • Reports values when either
    • Resistance decreases or increases by 10000 units
    • Temperature has changed more than 0,5 Celsius degrees
    • Ambient light change more than 10000 nW/cm², approx. 70 lux
    • Accelerometer when orientation changes more than 5 degrees
    • Event based messaging is always triggered by comparison to the previous reported value
  • Time based reporting
    • Reports all the measured values every 1 hour

Other default settings

  • Battery reporting interval 6 hours
  • Sensor is in routing mode

Settings’ impact to battery-life

  • 5 min measurement interval up to 4 years
  • 15 min measurement interval up to 5 years

Device info

Operating temperature -20 °C … +50 °C
Operating humidity 0 % … 100 % RH non-condensing
Storage temperature +5 °C … +25 °C
Storage humidity 45 % … 85 % RH non-condensing
IP rating grade: IP67
Certifications: CE, FCC, ISED and RoHS compliant
Battery type: 2 x AAA, fixed
Expected battery life:
•  Up to 3 years with default functionality (30sec measurement interval)
Radio sensitivity: -95 dBm (BTLE)
Size: width 34 mm, height 17,5 mm, length 58 mm
Weight: 35 g (including batteries)

Certifications

CE
FCC
ISED