2020.08.18.2_ts_pod4_leakagewp50

Firmware info

Version2020.08.18.2_ts_pod4_leakagewp50
Statusproduction

New features

  • 1st commercial firmware release

Error corrections

  • None

Known issues

  • None

Battery life

Test scenarioResult
All sensors using on average 30s measurement and 1h reporting intervalexpected battery-life 3 years
All sensors using on average 5min measurement and 1h reporting intervalexpected battery-life 4 years
All sensors using on average 15min measurement and 1h reporting intervalexpected battery-life 5 years

Compatibility

The firmware is compatible with the products using following IMCs (TUID prefix)

  • TSLK01
  • XXLK01

Wirepas info

Wirepas stack version5.0
Wirepas application flash size48
Wirepas application area ID0

Thingsee messages

This firmware uses following Thingsee messages

Application messages

The firmware application sends these messages to the cloud service.

Message TypeMessage headerDescriptionPropertiesMessaging
Timebased (tsmEv 10)tsmId=12100Report measurement values every 1 hourtemp lght lightint Timed reporting interval 3600s (60min)
Timebased (tsmEv 10)tsmId=12102Report measurement values every 1 hourresistance Timed reporting interval 3600s (60min)
Eventbased (tsmEv 9)tsmId=12102Measure resistance every 30s and report if absolute change detected.resistance 
when absolute change 10000
Measurement interval 30s (0.5min)Reporting only if the change is detected
Eventbased (tsmEv 9)tsmId=12100Measure temp and light every 5 minutes and report if changedtemp 
when absolute change 0.5
lght lghtint 
when absolute change 10000 
with attached properties lght
Measurement interval 300s (5min)Reporting only if the change is detected

Application commands

These commands and configurations can be send from the cloud to the firmware.

Message headerDescriptionPropertiesMessaging
tsmId=12200 (tsmEv 30)Select mode of operation of leakage resistance sensorleakageMode The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31
tsmId=12210 (tsmEv 30)Set the temperature and light hysteresistemperatureHysteresis lightHysteresis The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31
tsmId=12212 (tsmEv 30)This message can be used to remotely configure the leakage resistance sensorintervalMultiplier leakageMode resistanceHysteresis The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31

System messages

The firmware system sends these messages to the cloud service.

Message TypeMessage headerDescriptionPropertiesMessaging
Startup (tsmEv 11)tsmId=1100Report system infoswVersion modelCode psn 
Firmware response (tsmEv 33)tsmId=1102Indicates that the firmware can’t support requested tsmidrequestTsmId 
Timebased (tsmEv 10)tsmId=1110Report battery-level every 6 hoursbatl Timed reporting interval 21600s (360min)
Timebased (tsmEv 10)tsmId=1111Report acceleration data every 6 hoursaccx accy accz Timed reporting interval 21600s (360min)
Timebased (tsmEv 10)tsmId=1202Report network diagnostics every 12htuid rssi rssiDbm neighNodeInfo neighRadioPower neighRadioPowerDbm Timed reporting interval 43200s (720min)
Startup (tsmEv 11)tsmId=1312Report firmware binary infobinaryType binaryVersion 
Error (tsmEv 29)tsmId=1403Report error eventerrorType errorCause 

System commands

These commands and configurations can be send from the cloud to the firmware.

Message headerDescriptionPropertiesMessaging
tsmId=1101 (tsmEv 32)Cloud may requests tsmId on requestrequestTsmId 
tsmId=1500 (tsmEv 30)Change the interval for measurement and reportingmeasurementInterval reportInterval The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31
tsmId=1501 (tsmEv 30)Change Wirepas node role configurationtransactionId nodeRole autoRole lowLatency The cloud will send the command using tsmEv 30The firmware will echo the changes using tsmEv 31

Firmware descriptor for developers

HTTP GET https://support.haltian.com/device/tslk01/2020.08.18.2_ts_pod4_leakagewp50/firmware.json

Download firmware descriptor (JSON)