2019.04.23.1_ts_pod3wp34

ThingseeENVIRONMENT with 2018.08.02.1_ts_pod2 is used to measure following environment parameters

  • temperature
  • humidity
  • airpressure
  • ambient light
  • hall / magneto-resistive switch status
  • sensor orientation

The device has Wirepas connectivity and requires Wirepas-enabled gateway for cloud communication.

Firmware status

CE-certified and ready for commercial use.

What’s new

  • Heart-beat support
  • Machine-usage-monitoring mode where data is sent only when vibration is detected
  • Support for water-leakage detection casing to report when water leakage is detected

Default functionality

  • report a temperature value every 1 minute
  • report a humidity value every 1 minute
  • report an ambient light value every 1 minute
  • report an air pressure value every 1 minute
  • report x, y, z-axis gravity values every 1 minute
  • report battery-level information every 24 hours
  • report a count of changes in magnetic switch

Thingsee Messages

Following Thingsee Message profiles are used

  • Thingsee Message common profile (1)
    • 1100 Thing system info data
    • 1101 Thing information request
    • 1102 Thing information unavailable response
    • 1110 Thing battery info data
    • 1111 Thing orientation info
    • 1202 Sensor network neighboring data
    • 1312 Firmware binary version info
    • 1403 Error info
    • 1500 Sensor Application Interval Configuration
    • 1501 Sensor Wirepas Node Role Configuration
  • Thingsee Message environment measurement profile (12)
    • 12100 Environment values
    • 12101 Magneto sensor status
  • Thingsee Message machine-usage-monitor profile (16)
    • 16100 vibration data

Example data as received from Thingsee Operations Cloud

Environment values

[{
    "tsmId"        : 12100,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "temp"         : 22.3,
    "humd"         : 56,
    "airp"         : 101456.34,     
    "lght"         : 76
}]

Magneto-sensor status

[{
    "tsmId"        : 12101,
    "tsmEv"        : 10,
    "tsmTs"        : 1492603998,
    "tsmTuid"      : "TSTF02S3R1AL",
    "tsmGw"        : "TSGW1234",
    "hall"         : 0,     
    "hallCount"    : 0
}]

Machine-usage mode

{
  "tsmId"          : 16100,
  "tsmEv"          : 10,
  "activityLevel"  : 34200, //34.2%
  "energyLevel"    : 400,   // indicative value
  "histogram0"     : 2,     // > 128mG, detected count
  "histogram1"     : 14,    // > 300mG, detected count
  "histogram2"     : 45,    // > 500mG, detected count
  "histogram3"     : 23,    // > 1G, detected count
  "histogram4"     : 2,     // > 2G, detected count
  "histogram5"     : 1,     // > 3G, detected count
  "histogram6"     : 0,     // > 4G, detected count
}

Thingsee TestLab Reference Measurements

  • temperature measurement: passed, sensor component spec
  • airpressure measurement: passed, sensor component spec
  • humidity measurememnt: passed, sensor component spec
  • ambientlight measurement: indicative values, not calibrated
  • magneto-resistive switch: operate 7 gauss, release 5 gauss
  • machine usage mode: passed, example message
  • battery-life (interval): 4 year (1min), 8 years (15min)

Factory configuration

The following parameters are configured during the manufacturing process.

  • Wirepas connectivity parameters

Remote configuration

The following parameters are configurable remotely over Thingsee Operations Cloud.

  • measurement interval
  • Wirepas head-node and sub-node configuration
  • enable/disable machine-usage-monitoring mode
  • enable/disable positioning anchor mode

Installation Notes

The device is designed to be used indoors only.