sensor

How to use CBOR

Thingsee messages are created using open CBOR binary data serialization. This page has a list of all properties that are, at the moment, available for CBOR message content. New properties are added based on need.

Thingsee Open Device API

There are ways to make any sensor connected and managed through the open API, so that the application & services creators can focus on creating their stuff instead of worrying about the hardware Thingsee Open Device API is a low-level API and message description for IoT device vendors.

Wirepas firmware requirements

Requirements When creating Wirepas sensors the following requirements are expected the sensor will use minimum of Wirepas 5.0 The sensor will use Wirepas endpoint 21 for the Thingsee messages The sensor will support at least the minimum set of Thingsee Common Messages Optional functionality the sensor may support Thingsee heart-beat mechanism Minimum set of Thingsee Common Messages to be listed here

Thingsee LEAKAGE

Device info Operating temperature -20°C … +50°C Operating humidity 0% … 100% RH non-condensing Storage temperature 0°C … 25°C Storage humidity 45% … 85% RH non-condensing IP rating grade: IP67 Certifications: CE, FCC, ISED and RoHS compliant Battery type: 2 x AAA, fixed Up to 4 years with 5 minute interval Up to 3 years with Machine Usage Mode Radio sensitivity: -95 dBm (BTLE) Size: width 34.

Thingsee AIR

Product information Product name Thingsee AIR Product description Indoor AIR quality measurement Vendor name Haltian Oy Product type Wirepas sensor Internal Model Code (IMC prefix for TUID) TSAR01 XXAR01 Sensor measurement specifications CO₂ Measure CO₂ levels indoors Measurement range 400 - 5000 ppm Accuracy is ±(30ppm +3% of reading) Automatic baseline calibration takes 8 days, and requires that the CO₂ level drops at least once per day Possibility for manual baseline calibration CO₂ sensor is a nondispersive infrared sensor (NDIR) TVOC Total volatile organic compounds Measurement range 0 - 60000 ppb Resolution is 1ppb at range 0ppb-2008ppb Resolution is 6ppb at range 2008ppb – 11110ppb Resolution is 32 ppb at range 11110ppb - 60000ppb Automatic baseline calibration takes 24 hours.

Thingsee ANGLE RUGGED

Thingsee ANGLE RUGGED is a wireless IoT sensor that can be used to measure the angle of any rotational object such as if a valve is open or close.

Thingsee BEAM

Product information Product name Thingsee BEAM Product description Wireless IoT sensor for short distance measurement. Vendor name Haltian Oy Product type Wirepas sensor Internal Model Code (IMC prefix for TUID) TSTF04 XXXX20 Sensor measurement specifications Distance Measures distance at the range of 40mm - 4000mm Measurement range 40 - 4000 mm Measurement accuracy: ±20mm - ±25mm max, depending ambient light conditions and target reflectance Test materials used: solid, matte, white, 140mm reference distance Distance sensing area is square shape, 15-27 degrees, configurable region of interest (ROI) Hardware info Northbound interfaces Wirepas nRF52832 2.

Thingsee DISTANCE

Thingsee DISTANCE is a wireless IoT sensor for measuring short-range distance and e.g. a container fill rates. Measurement range : 50mm - 1500mm Measured accuracy: ±5% Test material used: solid, matte, white, 100mm reference distance Distance sensing area is a cone shape, 30-35 degrees If there are two or more objects reflecting light back to sensor, sensor computes average from these.

Thingsee ENVIRONMENT

Device info Recommended operation temperature: from 0oC to +50oC IP rating grade: IP20 Certifications: CE and RoHS compliant Battery type: 2 x AAA, replaceable Up to 2 years with 1-minute interval Up to 5 years with 15-minute interval Radio sensitivity: -95 dBm (BTLE) Detection capabilities Check the locations of actual sensor components for optimal installation Temperature -40 oC to + 85 oC.

Thingsee ENVIRONMENT (hw rev2)

Device info Operating temperature: -20°C … +50°C Operating humidity: 0% … 100% RH non-condensing Storage temperature: 5°C … 25°C Storage humidity: 45% … 85% RH non-condensing IP rating grade: IP30 Certifications: CE and RoHS compliant Battery type: 2 x AAA, replaceable Up to 4 years with 1 minute interval Up to 6 years with 15 minute interval Up to 1.